Next Gen Mini Excavators
Next Generation CAT 301.8 Enclosed Cabin with A/C
Excavator Hire includes:
- Dig Bucket 300mm
- Dig Bucket 450mm or if requested 600mm
- Mud Bucket 1000mm
- Sureweld 2600kg Mechanically Braked Trailer
“Adelaide Hills 7℃ winters morning this enclosed heated cabin allows dry, warm smiling work to continue”
Next Generation CAT 301.8 Roll Over Protection System
Excavator Hire includes:
- Dig Bucket 300mm
- Dig Bucket 450mm or if requested a 600mm
- Mud Bucket 1000mm
- Elite Twin Lock Hitch for one man bucket change
- Sureweld 2600kg Mechanically Braked Trailer
This CAT 301.8 has the ability to remove the Roll Over Protection (ROPS) for access under 1800mm height. Great for access under Roller doors. Just remember to reinstall the ROPS before working.
Bucket Cat Dig 300mm
Bucket Cat Dig 300mm
Bucket Cat Dig 600mm
Bucket Cat Dig 600mm
Bucket Cat Mud 1000mm Inc Pins Coupler Oz Half Hitch
Bucket Cat Mud 1000mm Inc Pins Coupler Oz Half Hitch
Sureweld 2600W Plant Trailer
Sureweld 2600W Plant Trailer
20 Ltr Deisel Can empty
20 Ltr Deisel Can empty
HIRE THE ENCLOSED CAB NEXT GENERATION
MINI EXCAVATORS | CAT 301.8C
If the details motivate you, take a look below at the impressive specifications the Next Generation CAT 301.8C Excavator has to offer.
CAT 301.8 SPECIFICATIONS & DIMENSIONS
FULL SPECIFICATIONS
ENGINE
| Net Power | 15.7 kW |
| Engine Model | C1.1 |
| Stroke | 81 mm |
| Bore | 77 mm |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Displacement | 1.1 l |
| Note (1) | Engine power is tested per ISO 14396:2002. |
| Note | Net power is tested per ISO 9249:2007 and 80/1269/EEC. |
| Net Power – 2,400 rpm – ISO 9249, 80/1269/EEC | 15.7 kW |
| Gross Power – SAE J1995:2014 | 16.1 kW |
WEIGHTS
| Operating Weight | 2029 kg |
| Maximum Operating Weight with Cab** | 2029 kg |
| Minimum Operating Weight with Canopy* | 1725 kg |
| Maximum Operating Weight with Canopy** | 1905 kg |
| Minimum Operating Weight with Cab* | 1848 kg |
| Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. |
| Note (1) | *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. |
| Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. |
| EU: CE Plate Weight with Cab*** | 2000 kg |
DIMENSIONS - LONG STICK
| Dig Depth | 2570 mm |
| Stick Length | 1160 mm |
| Vertical Wall | 1940 mm |
| Maximum Reach – Ground Level | 3960 mm |
| Track Width – Expanded | 1300 mm |
| O/A Undercarriage Length | 1590 mm |
| O/A Shipping Height | 2300 mm |
| Maximum Blade Height | 270 mm |
| Tail Swing | 995 mm |
| Track Width – Retracted | 990 mm |
| Maximum Blade Depth | 265 mm |
| Boom In Reach | 1420 mm |
| Maximum Dump Clearance | 2640 mm |
| Boom Swing – Right | 50 ° |
| Maximum Reach | 4030 mm |
| Boom Swing – Left | 65 ° |
| Maximum Dig Height | 3620 mm |
| Swing Bearing – Height | 442 mm |
| Boom Height – Shipping Position | 1020 mm |
| Minimum Ground Clearance Below Undercarriage | 150 mm |
| Track Belt/Shoe Width | 230 mm |
BLADE
- Height 225 mm
- Width* 990 mm
- Note *Expanded – 1300 mm (51 in)
TRAVEL SYSTEM
-
Travel Speed – Low 2.9 km/h Maximum Traction Force – High Speed 11.9 kN Travel Speed – High 4.4 km/h Ground Pressure – Maximum Weight 29.6 kPa Maximum Traction Force – Low Speed 18.4 kN Ground Pressure – Minimum Weight 26.8 kPa Gradeability – Maximum 30 degrees
HYDRAULIC SYSTEM
-
Operating Pressure – Equipment 245 bar Auxiliary Circuit – Secondary – Flow 14 l/min Digging Force – Bucket 19.6 kN Operating Pressure – Travel 245 bar Digging Force – Stick – Long 9.8 kN Auxiliary Circuit – Secondary – Pressure 245 bar Operating Pressure – Swing 147 bar Auxiliary Circuit – Primary – Flow 33 l/min Pump Flow at 2,400 rpm 66 l/min Type Load Sensing Hydraulics with Variable Displacement Piston Pump Digging Force – Stick – Standard 11.3 kN Auxiliary Circuit – Primary – Pressure 245 bar
CERTIFICATION - CAB AND CANOPY
-
Tip Over Protective Structure (TOPS) ISO 12117:1997 Roll Over Protective Structure (ROPS) ISO 12117-2:2008 Top Guard ISO 10262:1998 (Level I)
SERVICE REFILL CAPACITIES
-
Cooling System 3.9 l Hydraulic Tank 18 l Engine Oil 4.4 l Fuel Tank 26 l Hydraulic System 26 l
SOUND
-
Operator Sound Pressure (ISO 6396:2008) 73 dB(A) Average Exterior Sound Pressure (ISO 6395:2008) 93 dB(A) Note European Union Directive “2000/14/EC”
WEIGHT INCREASE FROM MINIMUM CONFIGURATION
-
Steel Tracks 50 kg Long Stick 8 kg Expandable Undercarriage 123 kg
SWING SYSTEM
-
Machine Swing Speed 9.8 r/min
